空压机润滑油系统可靠性试验研究

对空压机润滑系统进行分析,提出了一种润滑油压力调节机构,保证了空压机在高油温时油压正常,为空压机运动件提供充分润滑,从而提高空压机运行的可靠性。实验证明了该机构是可靠的,为空压机润滑系统设计提供了参考依据。     

改性石墨烯包覆光纤的马赫-曾德尔大肠杆菌传感器

针对日益严峻的食品安全问题,特别是食源性致病菌的快速检测,本文提出一种基于表面改性石墨烯粗锥型马赫-曾德尔干涉结构的光纤大肠杆菌传感器。首先,截取一根4 cm的实心光子晶体光纤,两端分别与两根单模光纤进行粗锥熔接,形成基于马赫-曾德尔干涉原理的传感结构;接着,制备一种表面改性石墨烯敏感材料,将它涂覆在实心光子晶体光纤的表面,使传感器对大肠杆菌溶液有较高的灵敏度;最后,将上述传感器置于水槽中,以此检测大肠杆菌溶液浓度。实验结果表明,在大肠杆菌溶液浓度为50~600 cfu/mL内,随着菌液的浓度增大,传感器的干涉光谱发生了明显的蓝移,灵敏度为3.43 pm/(cfu·mL^-1),菌液浓度与波长偏移的线性度为0.95649,检测限为67.18 cfu/mL,响应时间为15 s。该传感器成本低、体积小、响应时间快,适用于低浓度大肠杆菌浓度的快速检测。     

Machining accuracy improvement for a dual-spindle ultra-precision drum roll lathe based on geometric error analysis and calibration

This paper performs a comprehensive analysis and calibration on the geometric error of the ultra-precision drum roll lathe with dual-spindle symmetrical structure and cross slider layout. Firstly, the volumetric error model which contains all geometric errors of the dual-spindle ultra-precision drum roll lathe (DSUPDRL) is developed based on the combination of the homogenous transfer matrix (HTM) and multi-body system (MBS) theory. Secondly, sensitivity analysis for the volumetric error model is conducted to identify the sensitive geometric error components of the DSUPDRL using an improved Sobol method based on the quasi-Monte Carlo algorithm. The result of sensitivity analysis laid the foundation for the subsequent geometric error calibration. Then, some sensitive error components along the X and Z directions are calibrated using a laser interferometer and a pair of inductance displacement probes. Besides the volumetric error model, the concentricity error caused by dual-spindle symmetrical structure is proposed and calibrated by the on-machine measurement using a classic reversal method. Finally, a large-scale roller mold with a diameter of 250 mm and a length of 600 mm is machined using the DSUPDRL after calibration. The experimental result shows that 1.4 μm/600 mm generatrix accuracy is obtained, which validate the effectiveness of the geometric error analysis and calibration.     

基于船载卫星通信三轴天线的跟踪搜索技术

针对船载卫星通信三轴天线跟踪系统,介绍了船载三轴天线的系统组成,提出了一种基于捷联惯导的船载三轴天线跟踪搜索技术。天线以目标地理角为中心,通过坐标转换将目标地理角转换为天线的目标甲板角,调整AEC三轴使其及时准确地跟随目标甲板角。目前,该方法已经成功应用于多种船载三轴天线。实践表明,该方法能够快速准确地搜索到目标卫星,并实现对目标卫星的稳定跟踪。     

Applied data science in patient-centric healthcare: Adaptive analytic systems for empowering physicians and patients

We define the emerging research field of applied data science as the knowledge discovery process in which analytic systems are designed and evaluated to improve the daily practices of domain experts. We investigate adaptive analytic systems as a novel research perspective of the three intertwining aspects within the knowledge discovery process in healthcare: domain and data understanding for physician- and patient-centric healthcare, data preprocessing and modelling using natural language processing and (big) data analytic techniques, and model evaluation and knowledge deployment through information infrastructures. We align these knowledge discovery aspects with the design science research steps of problem investigation, treatment design, and treatment validation, respectively. We note that the adaptive component in healthcare system prototypes may translate to data-driven personalisation aspects including personalised medicine. We explore how applied data science for patient-centric healthcare can thus empower physicians and patients to more effectively and efficiently improve healthcare. We propose meta-algorithmic modelling as a solution-oriented design science research framework in alignment with the knowledge discovery process to address the three key dilemmas in the emerging “post-algorithmic era” of data science: depth versus breadth, selection versus configuration, and accuracy versus transparency.     

Exergy analysis of the diesel pre-reforming solid oxide fuel cell system with anode off-gas recycling in the SchIBZ project. Part I: Modeling and validation

Solid oxide fuel cell (SOFC) systems with anode off-gas recirculation (AGR) and diesel pre-reforming are advantageous because they can operate with the current fuel infrastructure. In the SchIBZ-project, the prototype of such a SOFC system for maritime applications has already been commissioned. In this first paper, we model the system devices to conduct an exergy analysis of this real SOFC plant and validate them with experimental values from experiments in laboratory scale. The results of our simulation agree well with the experimental values. The calculations with the validated results may be closer to the real thermodynamic behavior of such system components than previous literature.     

Plant inspection by using a ground vehicle and an aerial robot: lessons learned from plant disaster prevention challenge in world robot summit 2018

Abstract

In recent years, to prevent accidents and disaster are desired by implementing maintenance and management of facilities, such as conducting periodic inspections with appropriate frequency at plants. However, because the dangerous materials such as flammable gas and explosives is used in a plant, and there are many dangerous places in a plant such as high-temperature environment and high places and narrow spaces, it is desirable to use a remote-controlled robot for safety work and short inspections. Against this background, the Disaster Robotics Category-Plant Disaster Prevention Challenge was held in Japan at the World Robot Summit 2018. Our team was ranked 3rd in this competition, because our strategy of ‘inspection and investigation in cooperation with UGV and UAV’ was effective. In this paper, the competition contents of World Robot Summit 2018 and the robot inspection system that we are studying are explained. And what kind of strategy was challenged and result for these given competition tasks by using our robot system are introduced. And the lessons learned such as advantages and issues in UGV and UAV collaboration work at this competition are described for evaluate a robot investigation system for disaster response and inspection work at plants.     

多层圆片级堆叠THz硅微波导结构的制作

基于微电子机械系统(MEMS)工艺,提出一种多层圆片堆叠的THz硅微波导结构及其制作方法。为了验证该结构在制作THz无源器件中的优势,基于6层圆片堆叠的硅微波导结构,设计了一种中心频率365 GHz、带宽80 GHz的功率分配/合成结构,并对其进行了仿真。研究了制作该结构的工艺流程,攻克了工艺过程中的关键技术,包括硅深槽刻蚀技术和多层热压键合技术,并给出了工艺结果。最终实现了多层圆片堆叠功率分配/合成结构的工艺制作和测试。测试结果表明,尽管样品的插入损耗较仿真值增加3 dB左右,考虑到加工误差和夹具损耗等情况,样品主要技术指标与设计值较为一致。